Nortel Networks Industrial Handset User Manual

Page 19

DECT Industrial Handset User Guide

Issue 02

Galway M1 Design Support

If automatic call answering is used, the phone call will be accepted automatically. It is

not necessary to press the

key.

5.7 Silent

Mode

In Silent mode the handset will use the vibrator instead of ringer and bleep sounds.

To switch the Silent mode ON/OFF:

Press the

key immediately followed by the # key to switch the Silent mode ON

or OFF. SILENT is displayed when this option is switched on.

5.8 SOS

Button

Press the

key to enter Profile Set Up.

Press the

key to enter Set Profile.

Press the

key two times to select SOS Profile.

Press the

key to enter the SOS number.

FEATURES DURING CONVERSATION

6.1

Call Transfer

• Press the

key to place the call on hold.

• Dial the number to which the phone call must be transferred
• Inform the person at the other end

• Press the

key.

• The call is transferred

If the called number does not answer, the original phone call can be resumed by

pressing the

key again.

6.2

Call Hold

• Press the

key to place the call on hold

• Dial a number.

• Press the

key again to resume the original call