3 conformity, 4 using gap standard compliance, 5 recycling and disposal – Philips CD245 User Manual
Page 6
4
Important
1.3
Conformity
We, Philips declare that the product is in
compliance with the essential requirements
and other relevant provisions of Directive
1999/5/EC. This product can only be
connected to the analogue telephone
networks of the countries mentioned on
the packaging.
You can find the Declaration of
Conformity on www.p4c.philips.com.
1.4
Using GAP standard
compliance
The GAP standard guarantees that all
DECT
TM
GAP handsets and base stations
comply with a minimum operating
standard irrespective of their make.Your
handset and base station are GAP
compliant, which means the minimum
guaranteed functions are:
register a handset, take the line, receive a
call and dial.The advanced features may
not be available if you use another
handset than a CD240/245 with your
base station.
To register and use your CD240/245
handset with a GAP standard base station
of a different make, first follow the
procedure described in the
manufacturer’s instructions, then follow
the procedure described on page 32.
To register a handset of another make to
the CD240/245 base station, place the
base station into registration mode
(page 32), then follow the procedure in
the manufacturer’s instructions.
1.5
Recycling and disposal
Disposal instructions for old products:
The WEEE directive (Waste Electrical
and Electronic Equipment Directive ;
2002/96/EC) has been put in place to
ensure that products are recycled using
best available treatment, recovery and
recycling techniques to ensure human
health and high environmental protection.
Your product is designed and
manufactured with high quality materials
and components, which can be recycled
and reused.
Do not dispose of your old product in
your general household waste bin.
Inform yourself about the local separate
collection system for electrical and
electronic products marked by this
symbol.
Use one of the following disposal options:
• Dispose of the complete product
(including its cables, plugs and
accessories) in the designated WEEE
collection facilities.
• If you purchase a replacement
product, hand your complete old
product back to the retailer. He
should accept it as required by the
WEEE directive.