Philips CD245 - Manual (Page 44)

42 Frequently asked questions
10 Frequently asked
questions
In this chapter, you will find the most
frequently asked questions and answers
about your phone.
Connection
The handset does not switch on!
• Charge the batteries: Put the handset on
the base station to charge. After a few
moments, the phone will switch on.
The handset does not charge!
• Check charger connections.
icon is not blinking during
charge!
• Battery is full: There is no need to
charge the battery.
• Bad battery contact: Adjust the
handset slightly.
• Dirty contact: Clean the batteries
contact with a cloth moistened with
alcohol.
Communication is lost during a call!
• Charge the battery
• Move closer to the base station.
The phone is "Out of range"!
• Move closer to the base station.
Set-up
SEARCHING... is displayed on handset
and icon is blinking!
• Move closer to the base station.
• Make sure that your base station is on.
• Reset your unit and restart handset
registration.
INITIAL is displayed on handset
during charge!
• Charge the batteries for a few more
minutes to start up normally
Sound
Handset does not ring!
Check that the
RING VOLUME is not set
to RINGER OFF , and make sure icon is
not displayed on the screen (see “Set the
Ring Volume” on page 27).
Caller does not hear me!
Microphone may be muted: During a call,
press
p
.
There’s no dialling tone!
• No power: Check the connections.
• Batteries are empty: Charge the
batteries.
• Move closer to the base station.
• Wrong line cable used: Use the line
cable provided.