Philips CD245 - Manual (Page 31)

Advanced settings 29
7 Advanced settings
7.1 Change Recall time
Recall time (or dial delay) is the time delay
by which the line will be disconnected
after you press
r
key. It can be set to
short or long.
The default value of recall time that is preset
in your handset should be the best suited
for your country network and therefore
you should not need to change it.
Press
m
key in idle mode, scroll
:
to ADVANCE SET and press
m
OK , press
m
OK to enter
RECALL TIME .
Scroll
:
to SHORT or LONG and
press
m
OK to confirm.
• A validation tone is emitted and the
screen returns to previous menu.
7.2 Change the Dial Mode
(country-dependent)
The default value for dial mode that is
preset in your handset should be the best
suited for your country network and
therefore you should not need to change it.
Press
m
key in idle mode, scroll
:
to ADVANCE SET and press
m
OK , scroll
:
to DIAL MODE
and press
m
OK .
Scroll
:
to TONE or PULSE and
press
m
OK to confirm.
• A validation tone is emitted and the
screen returns to previous menu.
7.3 Call Barring
Call barring enables you to restrict selected
handsets from dialling a phone number
beginning with certain numbers. You can
set up to 4 different barring numbers, with
each number containing up to 4 digits.
7.3.1 To activate/deactivate Call
Barring
Press
m
key in idle mode, scroll
:
to ADVANCE SET and press
m
OK , scroll
:
to CALL
BARRING and press
m
OK .
Enter the Master PIN when
prompted and press
m
OK to
confirm.
Note
By default, the Master PIN is 0000.
Press
m
OK to enter BARR MODE .
Scroll
:
to ON or OFF and press
m
OK to confirm.
• A validation tone is emitted and the
screen returns to previous menu.
Note
When CALL BARRING is activated, BR
will be displayed on the screen.
7.3.2 To modify Call Barring
number
Note
If a restricted number is dialled, the call
will not be connected. When this
happens, the phone emits an error tone
and returns to idle mode.
1
2
1
2
1
2
3
4