Philips CD245 - Manual (Page 34)

32 Advanced settings
7.7 Registration
The procedures described below are the
procedures that you will find in your
handset. The procedures may vary
according to the handset you want to
register. In this case, please refer to the
manufacturer of the additional handset.
Additional handsets must be registered to
the base unit before you can use them. Up
to 6 handsets can be registered to one
base station.
The Master PIN is required before you
can register or unregister handsets.
Note
By default, the Master PIN is 0000.
On the base station, press and hold
p
for approximately 5 seconds.
On the handset, press
m
key,
scroll
:
to ADVANCE SET and
press
m
OK , scroll
:
to
REGISTRATION and press
m
OK .
Note
If no action is taken on the handset within
10 seconds, the registration procedure will
be aborted. If this happens, repeat Step 1.
Enter the Master PIN when
prompted and press
m
OK to
confirm.
Note
By default, the Master PIN is 0000.
WAITING _ _ is displayed on the
screen.
• Upon successful registration, a
validation tone is emitted and the
handset numbers (1 to 6) will be
assigned by the base automatically.
7.8 Unregister
Press
m
key in idle mode, scroll
:
to ADVANCE SET and press
m
OK , scroll
:
to UNREGISTER
and press
m
OK .
Enter the Master PIN when prompted
and press
m
OK to confirm.
Note
By default, the Master PIN is 0000.
Scroll
:
to select the handset
number to unregister and press
m
OK .
• A validation tone is emitted to indicate
successful unregistration and the
screen shows
UNREGISTERED .
Note
If no action is taken on the handset within
15 seconds, the unregistration procedure
will be aborted and the handset returns
to idle mode.
To unregister a handset that does not
belong to the CD240/245 range, you can
only use the CD240/245 handset to
unregister it.
7.9 Change Master PIN
The Master PIN is used for setting call
barring/baby call number, registration/
unregistration of handsets and for
accessing the answering machine
remotely. The default Master PIN
number is 0000. The maximum length of
the Master PIN is 8 digits. This PIN is also
used to protect the settings of your
handset. Your handset will prompt you
whenever the PIN is required.
1
2
3
4
1
2
3