Philips Garbo - Manual (Page 5)

>
To mute the sound of the projector and to mute the picture.
To select the current projection source (Computer, Component, S-Video or Video).
The button toggles between the four signals.
To adjust the volume.
To activate and deactivate the menu.
To confirm actions in the menu when the menu is on screen.
To switch the projector in or out of the Power/Standby mode.
The Standby indicator (text on button/ring around button):
–
lights up orange when the projector is warming up;
– lights up red when the projector is in Power/Standby mode;
– lights up green as when the projector is operating;
– slowly blinks orange when the projector is cooling down.
– Lights up red in case of temperature error.
– Flashes in case of fan error.
– Lights up green when the lamp is on.
– Lights up orange when lamp life has almost expired.
– Lights up red when lamp life has expired.
– Fast blinks red when lamp start has failed.
To receive the signals from the remote control.
When the menu is active the Cursor Control controls the menu cursor to navigate through the
OSD menu.The cursor control works with up/down and left/right button operation.
To adjust the focus of the projected image.
To adjust the size of the projected image.
A(udio)/V(ideo) Mute 1
Source 2
– / + 3
Menu 4
OK 5
Standby/
Standby indicator 6
Temperature indicator 7
Lamp indicator 8
IR sensor 9
Cursor Control 0
Focus ring !
Zoomring @
Philips Home Cinema Projector English User guide Garbo 5
2. Functional overview
! @
0
4 5
Menu OK AV Mute Source
Stand by
Lamp
Temp
Menu OK AV Mute Source
Stand by
Lamp
Temp
7 8 9
1 2 3
6
Controls