Philips Garbo - Manual (Page 24)

Digital Zoom/Magnification
‘Digital Zoom’ is used to enlarge a part of the picture.
1
Press Menu.
– The menu bar will appear.
2 Use Cursor Control to move the cursor to ‘Display’.
3 Use Cursor Control to move the cursor to ‘Digital Zoom’.
4 Select ‘On’ to switch ‘Digital Zoom’ on.
• Press OK to continue, or
• Press Menu to exit and continue with the previous Zoom settings.
5 Use the zoom target to select centre of the screen area you wish to enlarge.
• Press OK to confirm.
6 Use the Magnification slider to adjust the Zoom factor.
• Press OK to confirm and exit the menu.
7 Use Cursor Control to select another section of the enlarged area (‘Panning’).
By pressing the D(igital) Zoom button on the remote control you enter directly into the zoom centre
selection screen (step 4). When Digital Zoom is already active, pressing the D(igital) Zoom button will
show the Magnification slider; pressing the D(igital) Zoom button twice will turn off Digital Zoom.
Auto image
The Auto Image function automatically sizes and positions the image to fit optimally in the
screen picture. In addition it takes care for phase adjustment. It does not affect the selected
picture format. When Auto Image is set to On, the Horizontal size, Shift and Phase options are
greyed out.
Horizontal size
The Horizontal size function is used to size a computer image to make it fit the projected
picture. When the OSD menu is active and the horizontal size option is selected, the level will
be indicated graphically on a linear scale (slider).
Note
Philips Home Cinema Projector English User guide Garbo 24
5. Operation On Screen Display Menu >
off on
Picture
Digital Freeze
Digital Zoom
Magnification
Auto Image
Horizontal size
Phase
Shift...
Digital Zoom is used to enlarge part of the picture.
Audio Settings Display
Menu OK AV
Mute Source
Stand
by
Lamp
Temp
Menu OK AV
Mute Source
Stand
by
Lamp
Temp