Lamp, Lamp replacement, Maintenance – Philips Garbo User Manual
Page 28: Lamp lamp replacement, English user guide garbo
>
When operation time reaches the last 100 hours of the average lamplife, the message ‘Warning:
lamplife has almost expired’ will be displayed on the screen, each time the projector is switched
on.The lamp indicator lights up orange.
The lamplife remaining can be checked using the OSD menu.
1
Press Menu.
–
The menu bar appears on the screen.
2
Use Cursor Control to move the cursor to ‘Settings’.
3
Use Cursor Control to select ‘Lamp counter’.
–
The remaining lamplife hours are displayed in the action window at the bottom of the
screen.
–
When the lamplife has expired, the lamp indicator lights up red and the message
‘Warning: lamplife has expired’ is displayed on the screen.
1
Switch off the projector and wait until the lamp has cooled down (about 5 minutes) before
disconnecting the projector. Remove the mains lead from both projector and wall socket.
The mains lead must be disconnected from the projector otherwise the lamp door
cannot be removed.
2
Turn the projector over. Never place the projector on the side where the connections are
located!
3
Push tab A to the right and remove the lamp door.
–
When tab A is pressed the mains inlet socket will be partly closed. The lamp door therefore
cannot be removed if the mains lead is not disconnected from the projector.
4
Read the caution and warning labels on the lamp holder.
Lamp
Lamp Replacement
Philips Home Cinema Projector
English User guide Garbo
28
6. Maintenance
dE
Warning:
Lamplife has expired
It is suggested to change the lamp, to avoid sudden
failure and to improve overall picture quality.
Display
Audio
Settings
Picture
(previous)
Start-up screen
Lamp counter
Auto standby
Auto source
Feedback
Lamp
5 Hours
Lamp counter shows the operating hours of the
lamp. It is suggested to reset when a new lamp is
inserted. To reset keep OK key pressed
for 3 seconds.
Warning:
Lamplife has almost expired
It is suggested to have a spare lamp available.
The lamp type is indicated in the user guide.
Menu
OK
AV
Mute
Source
Stand
by
Lamp
Temp
Menu
OK
AV
Mute
Source
Stand
by
Lamp
Temp
Menu
OK
AV
Mute
Source
Stand
by
Lamp
Temp
Menu
OK
AV
Mute
Source
Stand
by
Lamp
Temp
A