Panasonic BT-LH2600W - Manual (Page 52)

52
Maintenance inspecions
Maintenance inspections through periodic and appropriate maintenance are essential to keep the monitor in
optimum condition and ensure safe operation. Be sure to conduct the following maintenance inspections to enable
long-term, full use of all its functions.
Necessity of periodic maintenance service
The backlight in the LCD panel is a consumable component that deteriorates over time leading to gradual loss of
performance that could eventually result in a malfunction.
Conventional after-sales service that replaces parts when they break down should therefore be combined with a
regularly conducted comprehensive service to maintain normal operation and prevent unforeseen breakdown of
consumables.
Maintenance
• Clean the cabinet and protection panel by gently wiping it with a soft cloth.
To remove stubborn soiling, use a cloth dampened in a weak neutral detergent solution and thoroughly wrung
out. Then wipe with a dry cloth. Any moisture entering the monitor could damage it.
• Do not use benzene, thinner and similar solvents for cleaning.
They could discolor the surface and cause the paint to peel.
• Do not directly expose the monitor to spray cleaning.
Any moisture entering the monitor could damage it.
Error Display
When an error has occurred for some reason, the tally lamp notifies the error.
Error display Symptom Remedy
Inverter error
The tally lamp
flashes red at
1-second intervals.
If a malfunction occurs in the inverter that
controls backlight brightness, the
backlight goes off and the screen turns
black. Turn off the power and then turn it back
on. If the problem still persists, consult
your dealer.