Panasonic BT-LH2600W - Manual (Page 37)

37
■
COMP.
Set “RGB-COMP” under “YP
B
P
R
/RGB” in the “INPUT SELECT” menu and select the “RGB-COMP” input line to
enable the “COMP” menu.
Underlined values indicate factory defaults.
*1 Run “AUTOSETUP” when video is displayed across the entire screen area. “EXECUTING” is displayed during
“AUTOSETUP” and “COMPLETE” appears when setup completes.
“INCOMPLETE” is displayed if setup could not be completed.
AUTOSETUP may not provide adequate adjustment for some video input. Use H POSITION, V POSITION,
PHASE and CLOCK to adjust.
*2 Each input format can be adjusted but not when user data is loaded (“SETUP LOAD” page 29) or saved
(“SETUP SAVE” page 29).
*3 “CLOCK” factory default
Sub menu Settings Description
AUTOSETUP
*1
Automatically adjusts RGB-COMP as well as H POSITION,
V POSITION, PHASE and CLOCK settings of input
formats. Selecting this submenu opens a confirmation
screen and setup starts after choosing "YES" in this
screen.
H POSITION
0 - 30 - 60 Adjusts horizontal image display position.
*2
V POSITION
0 - 30 - 60 Adjusts vertical image display position.
*2
PHASE 0 - 16 - 60 Adjusts the clock phase in 1/32 clock period increments.
*2
CLOCK 700 - 2200
(Factory preset settings:
*3
)
Adjusts the sampling clock in dot units.
*2
WXGA/XGA XGA
WXGA Switches between XGA (UXGA) and WXGA (WUXGA).
RESET Returns “H POSITION”, “V POSITION”, “PHASE” and
“CLOCK” settings in the RGB COMP. input compliant
format to their factory defaults.
FORMAT CLOCK FORMAT CLOCK
640 × 400 (70 Hz) 800 1024 × 768 (70 Hz) 1328
640 × 480 (60 Hz) 800 1024 × 768 (75 Hz) 1312
640 × 480 (75 Hz) 840 1024 × 768 (85 Hz) 1376
640 × 480 (85 Hz) 832 1280 × 768 (50 Hz) 1648
800 × 600 (60 Hz) 1056 1280 × 768 (60 Hz) 1680
800 × 600 (70 Hz) 1040 1280 × 768 (75 Hz) 1712
800 × 600 (75 Hz) 1056 1280 × 1024 (60 Hz) 1688
800 × 600 (85 Hz) 1048 1600 × 1200 (60 Hz) 2160
1024 × 768 (60 Hz) 1344 1920 × 1200 (60 Hz) 2080
Main Menu
(continued)