Panasonic BT-LH2600W - Manual (Page 39)

39
Underlined values indicate factory defaults.
*1 Available during HD-SDI input signals.
*2 Available during VIDEO (NTSC) input. Closed captions appear as bright lines on line 21 when closed caption is
set to ON and underscan is also on.
*3 Opens the vector display during SDI signal input.
DISPLAY SETUP
Sub menu Settings Description
TWO
WINDOW
SIZE L/S
M/M
S/L Selects size of split-screen displays.
main window LARGE, sub-window SMALL
main window MEDIUM, sub-window MEDIUM
main window SMALL, sub-window LARGE
SUB INPUT
SEL. VIDEO
SDI1
SDI2
YP
B
P
R
/RGB
DVI-D
Selects sub-window input in split-screen display.
WFM/
VECTOR OFF
WFM
VECTOR Switches between “WFM/VECTOR” waveform and vector display.
Displays
waveforms.
Displays vector waveforms.
*3
POSITION LB
RB
RT
LT Selects the position for the “WFM/VECTOR” waveform display.
*3
Left Bottom
Right Bottom
Right Top
Left Top
VECTOR
MODE Ч 8
Ч 4
Ч 2
Ч 1 Enlarges vector waveforms.
*3
<× 8> 8×
<× 4> 4×
<× 2> 2×
<× 1> 1×
VECTOR
SCALE
100%
75% Determines the scale of vector waveform.
<100%>
Displays it at 100% scale.
<75%> Displays it at 75% scale.
TIME CODE
OFF
ON Turns the time code display on and off.
*1
POSITION TOP
LEFT
CENTER
RIGHT Selects position of time code display.
Top center of screen
Bottom left of screen
Bottom right of screen
FONT SIZE LARGE
SMALL
Selects font size of time code display.
Twice the height and width of menu font size
Menu font size
MODE
SELECT
LTC
VITC
LUB
VUB Selects time code display mode.
*1
Displays linear time code (LTC).
Displays vertical interval time code (VITC).
Displays user bits included in LTC.
Displays user bits included in VITC.
CLOSED
CAPTION OFF
ON Turns closed caption display on and off.
*2
MODE
SELECT CC4
CC3
CC2
CC1
Selects the closed caption display mode.
*2
Main Menu
(continued)