Panasonic AJ-D400 - Manual (Page 90)

– 90 –
Recording With an External VTR Instead of the Internal VTR
Using the 26-pin Output Adaptor
Connections
The method of connecting the external VTR is the same as that described in “Recording Simul-
taneously with the Internal VTR and an External VTR”.
Á See “Connections” on page 87.
Mounting the 26-pin output adaptor
Á
Consult your local dealer when mounting the adaptor.
1
Set the unit’s internal switches.
1 Remove the side panel on the display window side.
2
Remove the Printed Circuit Board holder and remove the CAMERA ENC Printed Circuit
Board.
3 Set SW101 and SW102 to the 26P side.
2
Mount the 26-pin output adaptor.
CAM ENC Printed Circuit Board
Printed Circuit
Board Holder
CAM ENC Printed Circuit Board
SONY
MII
SONY
MII
26P
SW102
SW101
26P
(Illustration of AJ-YA900P)