Panasonic AJ-D400 - Manual (Page 24)

– 24 –
Power Supply
Using the Panasonic AU-BP402 Battery Pack
1
Detach the battery mounts.
2
Connect the unit’s connectors with the connectors of the AU-M402H battery case.
3
Mount the AU-M402H battery case.
Open the battery case cover and lift up the rubber cap to expose the screw holes. Tighten
the screws with a screwdriver and mount the case to the unit. Be sure to tighten the screws
completely.
| Notes {
Á Do not pull strongly on the rubber cap.
Á
Take care not to catch the connection cord between the battery case and the main unit.