Panasonic AJ-D400 - Manual (Page 34)

– 34 –
Adjusting the Viewfinder
Adjusting the Diopter and Screen
Adjusting the diopter
1
Set the POWER switch to ON. A picture will appear in the viewfinder.
2
Turn the diopter adjustment ring to adjust the diopter so that the viewfinder picture can be
clearly seen.
Adjusting the screen
Adjust the condition of the viewfinder screen.
Brightness:
Adjust the BRIGHT control
Contrast: Adjust the CONTRAST control
Contour: Adjust the PEAKING control
1
Set the POWER switch to ON.
2
Set the OUTPUT switch to CAM.
3
Turn the viewfinder BRIGHT and CONTRAST controls to adjust the picture brightness and
contrast. Turning the PEAKING control makes the picture appear softer or sharper. A sharp
picture facilitates focusing the lens.
Adjusting the Eyecup Position
Turn the eyecup forward-backward movement ring to adjust the position of the eyecup in the
forward-backward direction.
Diopter Adjustment Ring
-3
-2
-1
0
+1
+2
+3
Eyecup Forward-backward Movement Ring
BRIGHT Control
CONTRAST Control
PEAKING Control