beautypg.com

Aq-ec1, Pin cable ecu connector – Panasonic AJ-D400 User Manual

Page 44

background image

– 44 –

Connecting the AQ-EC1 Extension Control Unit (Option)

Connecting the AQ-EC1 extension control unit (option) allows a portion of the camera section
functions to be operated by remote control.
When the AQ-EC1 is connected and the POWER switches of the unit and AQ-EC1 are set to
ON, the unit automatically enters remote control mode.
The handling instructions included with the AQ-EC1 describe operations for when the AQ-EC1 is
connected to an AQ series digital camera.
When the AQ-EC1 is connected to the AJ-D400, some functions differ, and some features can-
not be used.

|

Notes

{

Á

The POWER switches of the unit and AQ-EC1 must be set to OFF before the 6-pin cable is
connected or disconnected.

Á

All adjustments and settings made using the switches and controls other than the menu setting
section of the AQ-EC1 are erased when the unit’s POWER switch is set to OFF. Also, adjust-
ments and settings made using the AQ-EC1 cannot be written to setup cards. However, when
the AQ-EC1 is connected again, these settings return to the AQ-EC1 settings.
(Menu contents set with the menu setting section are saved.)

|

Note

{

The functions of the AQ-EC1 are limited as follows.

Á

The STORE switch does not function.
(If the menu settings are changed while the AQ-EC1 is connected to the AJ-D400, the new
menu settings are saved automatically as soon as the changes are made.)
Note that the AQ-EC1 gain switch displays

p

3, 0 and 9 correspond to L, M and H, and the

OUTPUT switch settings CAMERA, TEST and BAR to CAM/AUTO KNEE ON, CAM/AUTO
KNEE OFF and BAR for each main unit.

Á

The Synchro scan and Super V modes cannot be used while the AQ-EC1 is connected to the
unit.

Á

The lens iris (IRIS) control of the AQ-EC1 is valid only when the lens iris AUTO/MANUAL se-
lector is set to AUTO.

6-pin Cable

ECU Connector

AQ-EC1

ECU AQ

O U T P U T

GAIN

WHITE

BALANCE

AUTO W/B
BALANCE

9
0

-3

CAMERA

TEST

BAR

A
B

PRE

AWB

ABB

MANUAL

AUTO

(dB)

SHUTTER

PAINTING

ON

OFF

ON

1/250

1/125

1/100

1/500

1/1000

1/2000

OFF

ECU

R

B

R

B

MASTER

PEDESTAL

IRIS

ON

OFF

PAGE

ITEM

UP

DWN

ON

SELECT

CONTROL

STORE

SET UP

GAIN

BLACK

-