Panasonic SX-KN7000 - Manual (Page 97)

Song Clear
Erase the recorded contents of all tracks.
1. On tne SEQ MENU display, select RECORD
& EDIT.
2. On the RECORD & EDIT display, selct SONG
CLEAR.
• The display looks similar to the following.
3. Use the SONG No./ALL
∧
and
∨
buttons to
specify the number of the song to erase.
• The data size (KB) and the total amount of
SEQUENCER memory or current song
memory used is shown as a percentage (%)
to the right of the song name.
• If ALL is selected, all the songs recorded in
the SEQUENCER will be erased.
4. Press the OK button.
• The confirmation display appears. Press the
YES button to execute the function, or press
the NO button to cancel the function.
• If the YES button is pressed, “COMPLETED!”
appears on the display, the specified songs
are erased.
Track Clear
Erase the contents of a specific track.
1. On the SEQ MENU display, select RECORD
& EDIT.
2. On the RECORD & EDIT display, select
TRACK CLEAR.
• The display looks similar to the following.
3. Use the balance buttons to select the track or
tracks you wish to clear.
• A “CLR” mark is shown for the selected tracks.
4. Press the OK button.
• The confirmation display appears. Press the
YES button to execute the function, or press
the NO button to cancel the function.
• If the YES button is pressed, the specified
tracks are erased.
Se
q
u
e
n
c
e
r
Part IV Sequencer
97
QQTG0671