Part viii sound – Panasonic SX-KN7000 User Manual

Page 156

FILTER RESONANCE:
Use the RESONANCE

∧

and

∨

buttons to adjust

the amount of resonance (0 to 127).

BRIGHTNESS:
Use the BRIGHTNESS

∧

and

∨

buttons to adjust

the brightness of the sound (0 to 127).

ATTACK TIME:
Use the ATTACK

∧

and

∨

buttons to specify the

attack time (0 to 127).

DECAY TIME:
Use the DECAY

∧

and

∨

buttons to specify the

decay time (0 to 127).

RELEASE TIME:
Use the RELEASE

∧

and

∨

buttons to specify

the release time (0 to 127).

VIBRATO RATE:
Use the RATE

∧

and

∨

buttons to specify the

vibrato speed (0 to 127).

VIBRATO DEPTH:
Use the DEPTH

∧

and

∨

buttons to specify the

vibrato depth (0 to 127).

VIBRATO DELAY:
Use the DELAY

∧

and

∨

buttons to specify the

time interval from when the keys are played until
the vibrato starts (0 to 127).

• The center value is 64 (±0).

MONO/POLY MODE:
Use the MONO/POLY MODE

∧

and

∨

buttons

to select the output mode.

PORTAMENTO:
Use the PORTAMENTO ON/OFF buttons to
enable or disable the portamento function. (Por-
tamento is a continuous gliding movement from
one tone to another.)
Use the

∧

and

∨

buttons to specify the porta-

mento time.
• PORTAMENTO does not function for the

POLY MODE.

MODULATION SENSITIVITY:
Use the MODULATION SENS

∧

and

∨

buttons

to adjust the sensitivity of the MODULATION
wheel.
• Use the MSB

∧

and

∨

buttons (half-tone in-

crements) and the LSB

∧

and

∨

buttons to

adjust the setting.

Part VIII

Sound

156

QQTG0671