Part vii sd card – Panasonic SX-KN7000 User Manual
Page 141
ALPHABET
Load the file from an alphabetical list of all songs
saved in TECHNICS format on the SD card.
1.
Use the
∧
and
∨
buttons to change the alpha-
betical letter or the display page.
2.
Use the
▲ and ▼ buttons to specify the song
to be loaded.
3.
Press the LOAD button.
NUMBER
From all songs saved in the TECHNICS FORMAT
on the SD card, select a song by specifying the
song number.
1.
Use the buttons below the display to specify
the song number.
• Specify the FOLDER (01– 99) first, and then
select the SONG (01– 20).
• A number should be specifyed as a 2-digits
number. (Enter 0 and 1 for the number 1.)
2.
Press the LOAD button.
the SD card to your instrument.
1.
Use the PAGE buttons to access the PAGE
2/3 display.
• The display looks similar to the following.
2.
Use the buttons below the display to specify
the types of data you wish to load (YES/NO).
• - - - - - indicates that this type of data has not
been saved.
• This setting is canceled when you quit the
LOAD display or when another file is selected.
3.
Press the LOAD button.
• The LOAD operation begins.
card into a specific PANEL MEMORY, COM-
POSER (MEMORY), SOUND MEMORY, EF-
FECT MEMORY or SEQUENCER (when SONG
SAVE was executed) memory.
1.
Use the PAGE buttons to access the PAGE
3/3 display.
• The display looks similar to the following.
2.
Use the MODE button to select the data you
wish to load.
3.
Use the BANK/SINGLE button to select the
load increment. (except for SEQUENCER)
BANK:
Load one bank at a time.
SINGLE:
Load the smallest data increment.
4.
Follow the appropriate procedure to load the
specified data.
• Specify the data source for FROM (left side),
and the data destination (this instrument’s
memory location) for TO.
• In the case of the COMPOSER, when you
press the ACCOMP DSP COPY OPTION but-
ton, you can specify which effects to load.
SD
c
a
rd
Part VII
SD card
141
QQTG0671