Panasonic AJ-D92P - Manual (Page 49)

49
509 TCG CF FLAG
0000
0001 OFF
ON
For setting whether to add the CF flag of the TCG to the CF bit (color frame
bit) of the TCG.
0: CF flag is not added. (LTC CF bit: 0)
1: CF flag is added. (LTC CF bit: 1)
510 DF MODE
0000
0001 DF
NDF
For setting the TCG drop frame mode.
0: The unit is used in the drop frame mode.
1: The unit is used in the non-drop frame mode.
530 UB MODE
0000
0001
0002
0003
USER
TIME
DATE
EXT
For setting the mode in which the user’s bit is used.
0: The user’s bit is used for the user setting. (Fixed)
1: The user’s bit is used for displaying hours, minutes and seconds in real-
time operation.
2: The user’s bit is used for displaying the year, month, day, and time in
real-time operation.
3: The UBG value is slave-locked while the TC signal is input from an
external source.
(The user setting is used when no signal is input from an external
source.)
531 TCG SET HOLD
0000
0001
OFF
ON
For setting whether to make the TCG setting operable when recording is to
be performed after the TCG is set, the power is turned off and back on
again.
0: Recording is performed according to the FIRST REC TC setting in No.
532.
1: The TCG setting is made operable, and recording starts from the value of
the TCG displayed.
532 FIRST REC TC
0000
0001 REGEN
PRESET
For setting whether to record in the regeneration mode when recording for
the first time after the cassette was inserted or from the STOP mode or
power-on status.
0: Recording is performed in regeneration mode.
1: Recording is not performed in regeneration mode.
(Recording starts from the value of the TCG displayed.)
TIME CODE menu
Item Setting
No.
Superimposed
display
No.
Superimposed
display
Description of setting
The underlining indicates the factory setting.
Setup Menus
540 TIME/DATE
.. For setting the time and date.
00 YEAR 0000
0099
00
99
For setting the year.
01 MONTH 0001
0012
01
12
For setting the month.
02 DAY 0001
0031
01
31
For setting the day.
03 HOUR 0000
0023
00
23
For setting the hours.
04 MINUTE 0000
0059
00
59
For setting the minutes.
05 SET ––– ––– For setting the date and time.