Panasonic DMR-E20 - Manual (Page 54)

54
TV
TV/AV
PROG / CHECK
TOP WINDOW
TV/TEXT
STOP
SV/V+
REC
TIME SLIP
AV LINK
SETUP
AUDIO
REC MODE CANCEL
INPUT
SELECT
MANUAL
SKIP
LAST
MARKER
DIRECT
TV REC
TIMER
REC
1 2 3
4 5 6
7 8 9
0
PAUSE PLAY
STATUS
RETURN
VOL
OPEN/CLOSE
T C E R I D
R O T A G I V A N
TO
P M EN
U M
E N
U
DISPLAY
T SI L Y A L P
ENTER
TV DVD
TV ASPECT
FRAME
SKIP SLOW/SEARCH
Á
2·3·
4·5
1
/
Using play lists to edit programmes (continued)
Creating play lists
[RAM]
You can specify start and end points to create a scene, then specify the order in which these
scenes are played. These scenes are not recorded separately so this doesn’t use up much of the
disc’s capacity.
Preparation
≥Switch [DVD, TV] to “DVD”.
≥Insert a disc you have recorded on.
1 While stopped
Press [TOP WINDOW].
2 Use the joystick [ 3, 4, 2, 1] to select “CREATE PLAY LIST” and press
[ENTER].
3 Use search functions such as fast-forward and
slow-motion to find the start point of the scene and
press [ENTER].
4 Use search functions such as fast-forward and
slow-motion to find the end point of the scene and
press [ENTER].
5 Use the joystick [ 3, 4] to select “Exit” and press
[ENTER].
ªTo stop partway through
Press [RETURN].
ªTo clear the play list screen
Press [MENU, PLAY LIST] or [RETURN].
The screen returns to the state it was in before you called up the play list.
ªTo specify another scene
Select “Next” after step 4 and press [ENTER], then repeat steps 3 and 4.
For your reference
≥One disc can have a maximum of 99 play lists and 999 scenes. These numbers may be
reduced under some conditions.
≥You can respecify the start or end points. The points you specify last are used.
≥You cannot specify an end point before a start point or a start point after an end point.
≥If you specify an end point but not a start point, the unit determines the beginning of the
programme as the start point. Similarly, if you specify a start point but not an end point, the unit
determines the end of the programme as the end point.
≥You may not be able to specify start and end points if the material is still pictures recorded on
other equipment.
≥The unit pauses play when the end of the last programme on the disc is reached during this
procedure.
≥You cannot create or edit play lists if “Disc Protection” in “DISC INFORMATION” is “On” (page
40).
≥You cannot create or edit play lists if the write protect tab on a cartridge disc is set to protect.
Release this before operation (page 91).
≥You can also display the CREATE PLAY LIST screen by selecting “jj” at the bottom of the
play list.