Panasonic DMR-E20 - Manual (Page 11)

11
Connecting and Setting up (continued)
Preset Download
(To Simultaneously set up this unit with a
new television)
First, switch this unit to standby.
Switch on the television.
≥The television starts tuning all available stations and adjusting
the clock.
≥When the television finishes its own auto setup, this unit switches
on and starts downloading the setup data from the television (if it
has [Q Link] or [DATA LOGIC]).
≥If your television has [Easy Link], [Megalogic] or [SMARTLINK],
the Country setting menu appears on the television. Use the
joystick [
3, 4, 2, 1] to select the country and press [ENTER].
≥Downloading starts.
≥Downloading is complete when you see the television picture.
Note:
≥If you switch on this unit before switching on the television,
downloading may not be performed correctly. Follow these steps
if this occurs.
1) Wait until Auto Setup is complete on both the television and
this unit.
2) Press [SET UP] to display the “Settings” menu on the
television.
3) Use the joystick [ 3, 4, 2, 1] to select “Tuning” and then
“Download”.
4) Press [ENTER] and select “Yes”. Downloading starts.
≥Downloading is complete when you see the television
picture.
Hints:
≥If you have a Panasonic television, starting downloading will
automatically display “Download”. If you have a different
television, however, “Download” may not appear. Select the AV
input on your television to see “Download”.
≥If you select “Schweiz”, “Suisse”, or “Svizzera” in the Country
setting menu, another menu appears to let you set “Power Save”
to “On”. In this setting, the unit’s power consumption is minimised
when it is switched to standby. To turn the unit on, press and hold
[
Í/I] on the main unit. On the remote control will not work.
Preset Download
(To set up this unit with a television in
use)
1 Switch on the television.
2 Select the AV input on your television.
3 Press [ Н Н Н Н/I] to switch the unit on.
≥Downloading of the setup data starts (if your television has
[Q Link] or [DATA LOGIC]).
≥If your television has [Easy Link], [Megalogic] or
[SMARTLINK], the Country setting menu appears on the
television. Use the joystick [
3, 4, 2, 1] to select the
country and press [ENTER].
≥Downloading starts.
≥Downloading is complete when you see the television
picture.
Hint:
≥If you select “Schweiz”, “Suisse”, or “Svizzera” in the Country
setting menu, another menu appears to let you set “Power Save”
to “On”. In this setting, the unit’s power consumption is minimised
when it is switched to standby. To turn the unit on, press and hold
[
Í/I] on the main unit. On the remote control will not work.