Panasonic DMR-E20 - Manual (Page 16)

16
When a menu screen appears on the television
[DVD-V] [VCD]
Operate menus with the following operations. Actual operations depend on the disc.
Press the numeric buttons to select an item, or move the joystick [
3, 4, 2, 1] to select
an item and press [ENTER].
≥You can return to menus after you start play by pressing [TOP MENU] or [MENU] (DVD-Video),
or [RETURN] (Video CD).
Note
≥The disc continues to rotate while the menu is displayed even after you finish playing an item.
Press [ ∫, STOP] when you finish to preserve the unit’s motor and your television screen.
≥Volume may be lower when playing DVD-Video than when playing other discs or during
television broadcasts.
If you turn the volume up on the television or amplifier, ensure you reduce the volume again
before playing other sources or returning to the television so that a sudden increase in output
does not occur.
For your reference
≥If “ ” appears on the television
The operation is prohibited by the unit or disc.
≥If a disc is loaded, the unit will come on and play will start when you press [1, PLAY].
≥If you play a disc that includes parts without video, the unit may display the video from the disc
you were playing immediately before that disc.
Starting play from where you stopped it (Resume Function)
[RAM] [DVD-R] [DVD-V] [CD] [VCD]
1 During play
Press [ ∫, STOP].
≥The unit remembers the position.
2 Press [ 1, PLAY] while the indicated part of the center
circle appears on the display.
≥Play starts from where you stopped it.
ªTo cancel the resume function
Press [ ∫, STOP] while the indicated part of the center circle appears on the display.
(The position is also cleared when you turn the unit off.)
ªTo start play from a memorized position after turning the unit off
Press [LAST MARKER] during play.
(The message “Position Memorized” appears on the television.)
Now when you press [
1, PLAY] after switching the unit to standby and back on, play starts from
the memorized position.
For your reference
[DVD-R] [DVD-V] [CD] [VCD]
≥The position memorized when you press [∫, STOP] or [LAST MARKER] is cleared when you
open the disc tray.
[RAM]
≥The last marker is written to the disc and remains intact until you mark a different position.
You cannot mark positions if the disc is write-protected with DISC INFORMATION (page 39) or
with the write protect tab (page 91). Release the protection before marking position.
≥If you press [∫, STOP] before switching the unit to standby after pressing [LAST MARKER] to
memorize a position, play will resume from the position you pressed [ ∫, STOP] when you press
[ 1, PLAY].
≥The position memorized when you press [∫, STOP] is cleared when you switch the unit to
standby or if the unit switches to standby automatically (page 73, Setting s — Off Timer).
TV
TV/AV
PROG / CHECK
TOP WINDOW
TV/TEXT
STOP
SV/V+
REC
TIME SLIP
AV LINK
SETUP
AUDIO
REC MODE CANCEL
INPUT
SELECT
MANUAL
SKIP
LAST
MARKER
DIRECT
TV REC
TIMER
REC
1 2 3
4 5 6
7 8 9
0
PAUSE PLAY
STATUS
RETURN
VOL
OPEN/CLOSE
T C E R I D
R O T A G I V A N
TO
P
M EN
U M E
N U
DISPLAY
T SI L
Y A L P
ENTER
TV DVD
TV ASPECT
FRAME
SKIP SLOW/SEARCH
Á
2 1
/
Playing discs (continued)