Panasonic DMR-E20 - Manual (Page 13)

13
Connecting and Setting up (continued)
Auto Setup
Auto Setup automatically tunes all available stations and sets the unit’s clock to the current date
and time.
1 Press [ Н Н Н Н/I] to switch the unit on.
≥The Country setting menu appears on the television.
2 Use the joystick [ 3, 4, 2, 1] to select the country.
3 Press [ENTER].
≥Auto Setup starts. This takes about 5 minutes.
≥Auto Setup is complete when you see the television picture.
To cancel Auto Setup before it finishes
Press [RETURN].
If the clock setting menu appears after Auto Setup finishes
1) Use the joystick [ 3, 4, 2, 1] to set the correct time and date.
2) Press [ENTER] to conclude the setting.
To confirm that stations have been tuned correctly
See page 81.
When no stations have been set, confirm all connections and restart Auto Setup
See page 83.
When station names or channel numbers have not been set correctly
See page 81.
Hint:
≥If you select “Schweiz”, “Suisse”, or “Svizzera” in the Country setting menu, another menu
appears to let you set “Power Save” to “On”. In this setting, the unit’s power consumption is
minimised when it is switched to standby. To turn the unit on, press and hold [
Í] on the main
unit. On the remote control will not work.