58 using scene files (scene file data) (continued) – Panasonic AG-HPX250EN User Manual
Page 58

58
Using scene files (Scene File Data) (continued)
Saving scene files and other settings
on SD memory cards
You can save up to four scene file settings or other
settings as files on an SD memory card, and you
can also load them from the card.
• Current scene file settings are automatically
saved in the camera-recorder and written to an
SD memory card. When data has been read
from an SD memory card, the current settings
are rewritten at the same time as the data saved
inside the unit.
• The data in all the scene files, F1 to F6, is
rewritten.
• Be sure to read cards> (Page 162) regarding SD memory handling. The following procedure shows how to save scene 1 Set the POWER/MODE switch to ON. 2 Select SCENE FILE from the setting menu CARD FUNCTIONS screen, and press SET on the Operation lever (or push it in the ► direction). • For details on menu operation, refer to “Using the setup menus” (Page 28 of Vol. 1). PUSH MENU TO RETURN SD CARD FORMAT >>> >>> >>> USER FILE SCENE FILE CARD FUNCTIONS 3 Select CHANGE, and press SET on the Operation lever, (or push it in the ► direction). • Select the menu option USER FILE for other settings. PUSH MENU TO RETURN SD CARD FORMAT >>> USER FILE SCENE FILE CARD FUNCTIONS RETURN CHANGE 4 Push the Operation lever in the ▲ ▼ direction, and select file number (1 to 4). • Press the SET button again to confirm the setting. PUSH MENU TO RETURN WRITE TITLE RELOAD FILE1 FILE2 FILE3 FILE4 >>> 1 >>> >>> NO FILE NO FILE NO FILE NO FILE READ FILE SELECT SCENE FILE (SD CARD) 5 Select WRITE → EXECUTE with the Operation lever, and press SET. PUSH MENU TO RETURN WRITE TITLE RELOAD FILE1 FILE2 FILE3 FILE4 >>> 1 >>> NO FILE NO FILE NO FILE READ FILE SELECT SCENE FILE (SD CARD) RETURN EXECUTE 6 Push the Operation lever in the ◄ direction and select YES when the screen below is displayed, and press SET. • In the following example, TITLE 1 is the filename. • When writing is completed, WRITE OK appears. PUSH MENU TO RETURN NO TITLE EDIT TITLE 1 WRITE FILE 1 SCENE FILE (SD CARD) YES PUSH SET ( ) To load a file Perform steps 1 to 4. Select READ in step 5, select Reloading Files From an SD Memory Card Perform steps 1 to 3, move to TITLE RELOAD so
files.
EXECUTE and press the SET button on the
Operation lever. READ OK appears when loading
completes.
Like scene files, process user files by using the
menu option USER FILE in the CARD FUNCTION
screen.
that YES is displayed in step 5, and press the SET
button on the Operation lever. The file is reloaded.