Panasonic AG-HPX250EN - Manual (Page 152)

152
OTHER FUNCTIONS screen (continued)
Item Setting Notes
TIME ZONE Adds to or deducts from GMT the time value of -12:00 to
+13:00 in 30-minute steps. (As an exception, you can set
+12:45.) Refer to the table below.
0:00
Time
difference
Time
difference
Area Area
00:00 Greenwich 01:00
00:30 01:30
01:00 Azores Islands
Mid-Atlantic
02:00
01:30 02:30
Eastern Europe
Moscow
Central Europe
02:00
Buenos Aires
03:00
02:30
Newfoundland Island
03:30
03:00
Halifax
04:00
03:30 04:30
04:00
New York
05:00
04:30 05:30
Islamabad
Tehran
Abu Dhabi
05:00
Chicago
06:00
05:30 06:30
06:00
Denver
07:00
07:30
Dacca
Lord Howe Island
Bangkok
Beijing
Tokyo
07:00
06:30
Los Angeles
08:00
Yangon
07:30 08:30
08:00
Alaska
09:00
08:30
Marquesas Islands
09:30
Guam 09:00
Hawaii
10:00
Bombay
09:30 10:30
Kabul
10:00
Midway Island
11:00
Norfolk Island
New Zealand 10:30 11:30
11:00 12:00
11:30
Kwajalein
12:45
12:00 13:00
Chatham Islands
Solomon Islands
Darwin
00:30
• This setting cannot be initialized
by performing the MENU INIT
option and the INITIAL option in
USER FILE.
• After setting the time, change
the setting menu TIME ZONE
item and the display and the
recorded local time will be
reset accordingly.
GL PHASE Selects the output signal whose phase is locked to the
signal input to the GENLOCK IN connector in HD (1080i,
720P) mode. (Page 70)
HD SDI:
The HD SDI is locked to the genlock input.
COMPOSITE:
The down-converted composite signal (VIDEO OUT or
SDI OUT 480i, 576i signal) is locked to the genlock input.
• Not available when SYSTEM
MODE is set to 480-59.94i or
576-50i.
H PHASE Adjusts the horizontal phase when phase is locked to the
signal input to the GENLOCK IN connector.
– 512…0…+ 511
• Values change quickly when
the Operation lever is held in
the ▲ ▼ direction.
SEEK SELECT Selects the position that is cued up when the Operation
lever in the   direction is pressed while playback is
paused.
CLIP:
Start point of clips
CLIP&T:
Start point of clips and text memo add points
MENU INIT Restores all setting menu values including all scene files
(F1 to F6) and the user file to their factory defaults.
• Not available in the following
conditions.
· When REC SIGNAL is set to
1394.
· When compiling to a clip in
one-clip recording mode.
Setup menu list (continued)
___indicates the factory setting.