Pride Mobility jazzy 1120 - Manual (Page 28)

28 Jazzy 1120
2000
V I I I . O P E R A T I O N
REMOTE PLUS CONTROLLER
The Remote Plus controller system consists of the joystick (see figure 39)
and the controller box. The joystick sends signals to the controller box
through a cable attached to the back of the joystick. This cable connects to
the controller box through the utility tray. The Remote Plus joystick is typi-
cally located at the end of either the right or the left armrest. The Remote
Plus controller box is located underneath the front of the power base.
Joystick Functions
The joystick function is similar for all controller configurations. The joy-
stick controls the direction and speed of the wheelchair. See figure 40.
When you move the joystick from the neutral (center) position, the elec-
tromagnetic brakes release and allow the wheelchair to move. The further
you push the joystick from its neutral position, the faster your Jazzy moves.
When you release the joystick and allow it to return to the neutral position,
you engage the electromagnetic brakes. This causes the chair to decelerate
and come to a complete stop. If your Jazzy begins to move in an unex-
pected manner, immediately release the joystick. Unless the joystick is
damaged, this action should stop your Jazzy.
WARNING! Do not use the on/off key to stop the
chair. This may cause injury.
Battery Condition Meter
The battery condition meter consists of ten LEDs over the speed indicator.
See figure 39. These lights are an accurate indication of your usable bat-
tery capacity. They also alert you of any faults found within your unit. See
“Trouble Codes.”
On/Off Key
The on/off key turns your unit on and off.
Horn Key
This key activates the horn.
Figure 40. Joystick Movement
Figure 39. Remote Plus Joystick
Features
BATTERY
CONDITION
METER
ON/OFF KEY
MODE
KEY
HORN
KEY
SPEED
INDICATOR
TURN
SIGNAL
Figure 41. Remote Plus Optional
Features
LIGHT
SWITCH
HAZARD
WARNING
TURN
SIGNAL