Polaris Outlaw 9920783 - Manual (Page 157)

154
ADJUSTMENTS
Front Suspension
Suspension Set-Up
1. Position the vehicle on a level surface.
2. Stop the engine.
3. Elevate the front of the vehicle by placing a
suitable stand under the frame.
NOTE: The tires should be barely touching the
ground and the suspension should be at
full rebound.
4. Measure the distance from the ground to the
bottom of the lower front bumper bolt. Note
this measurement for later use.
5. Remove the stand and have a rider sit
comfortably on the seat with hands on the
handlebars.