Maintenance and lubrication – Polaris Outlaw 9920783 User Manual
Page 140

137
MAINTENANCE AND LUBRICATION
Battery Charging (Sealed Battery)
The battery included with your ATV is sealed and the sealing strip cannot be removed. Use
a voltmeter or multimeter to measure DC voltage. A fully charged battery will register 12.8
V or higher. If the voltage is less than 12.8 volts, recharge the battery. Use the remote
charging terminals under the right front cab. Removing the cab is not necessary.
NOTE: The Polaris Battery Tendert battery charger can be left connected during the
storage period and will automatically charge the battery if the voltage drops below
a pre-determined point.
This manual is related to the following products: