beautypg.com

Maintenance and lubrication – Polaris Outlaw 9920783 User Manual

Page 113

background image

110

MAINTENANCE AND LUBRICATION

Oil Pump Priming

This priming procedure must be performed whenever the

oil hose connection between the oil tank and pump inlet

has been disconnected.
1. Clamp or pinch off the vent line (1) approximately

2I (5 cm) from the oil tank.

2. Run the engine for 5-10 seconds at idle. Stop the engine

and remove the vent line clamp. If the line is bled

properly, you should hear a rush of air, indicating that

the line is properly primed and ready for operation. If

you do not hear air, the line has not bled, and you’ll

need to repeat the priming procedure.

1