Erasing & playing, English, Selecting a track or searching – Philips CDR 560 User Manual
Page 18: Playing a cd, Erasing cd-rw discs
16
English
For CD-RW discs only.
You can erase:
- track by track from the end.
- the entire disc.
To erase the last track :
1 Make sure the disc is not finalized (Showing OPC on
display during start up). Otherwise unfinalize first (p. 15)
2 Press ERASE.
➜ On the display, TRACK and
ERASE
will flash.
3 Press RECORD within 3 seconds.
➜ TRACK and
ERASE
light continuously during erasure.
To erase the entire disc:
1 Press ERASE once (for finalized CD-RW) and twice (for
unfinalized CD-RW).
➜ On the display, DISC and
ERASE
will flash.
2 Press RECORD within 3 seconds.
➜ DISC and
ERASE
light continuously during erasure.
Erasure of a complete disc may take up to 1.5 minutes.
1 Press PLAY to start CD play.
➜ The track number and track time appear on the display,
together with the record/play level indicator.
2 Press Display once, twice, or three times to see:
➜ remaining track time; Total remaining time; Track time
with the record/play level bar off.
3 To interrupt play temporarily, press PAUSE.
➜
PAUSE
will light up on the display
4 To continue play, press PAUSE again or press PLAY.
5 To stop play, press STOP.
➜ The number of tracks and the total playing time will
appear on the display
Selecting a track during play
1 Briefly press ∞ or § one or more times.
➜ Play skips to the beginning of the present, previous or
following track.
or
• Press the required track number using the numerical keys
on the remote control. For 2-digit track numbers, press the
keys in rapid succession.
➜ Play skips to the beginning of the selected track.
OPEN/CLOSE
RECORD LEVEL
MIN
MAX
PREV
STOP
CD SYNCRO
RECORD
ERASE
FINALIZE
PLAY
PAUSE
NEXT
REPEAT 1
PAUSE
CD SYNC
TOTAL
REM
TIME
-40
-30
-20
-10
-6
-3
0
OVER
RECORD
Recordable
Selecting a track or searching
CDR
MINI CD RECORD
ER
SOURCE
DISPLAY
AUTO / MAN
UAL
POWER ON/OFF
OPEN/CLOSE
RECORD LEVEL
MIN
MAX
PREV
STOP
CD SYNCRO
RECORD
ERASE
FINALIZE
PLAY
PAUSE
NEXT
PAUSE
CD SYNC
TIME
0
OVER
RECORD
Playing a CD
PROG
REPEAT 1
ALOG
DIG
COPY
ERASE
CD SYNC
TOTAL
AUTO
TRACK
TRACK
REM
TIME
C
RECORD
FINALIZE
PROG
REPEAT 1
LOG
DIG
COPY
ERASE
CD SYNC
TOTAL
AUTO
TRACK
TRACK
REM
TIME
C
RECORD
FINALIZE
Erasing CD-RW discs
ERASING & PLAYING