Paradyne IP DSLAM BitStorm 2600 - Manual (Page 9)

2600-A2-GN20-40 March 2005 iii
About This Guide
Document Purpose and Intended Audience
This document is written for technicians who install the BitStorm ® 2600 IP DSLAM.
Document Summary
A master glossary of terms and acronyms used in Paradyne documents is
available on the World Wide Web at www.paradyne.com. Select Support
→
Technical Manuals → Technical Glossary .
Section Description
Chapter 1, Installation Describes the physical installation of the BitStorm 2600 into
a rack.
Chapter 2, Cabling Describes how to install all cables for the BitStorm 2600.
Chapter 3, LEDs Explains the meaning and usage of the front panel LEDs.
Chapter 4, Configuration Describes the minimal configuration steps required to
prepare the BitStorm 2600 for remote access, using the
command line interface and web interface.
Appendix A, Connectors
and Pin Assignments Provides pinouts for connectors on the BitStorm 2600.
Appendix B, Equipment List Provides part numbers for the BitStorm 2600 and related
products.
Appendix C, Technical
Specifications Lists the technical characteristics of the BitStorm 2600.
Index Lists key terms, acronyms, concepts, and sections in
alphabetical order.