Paradyne IP DSLAM BitStorm 2600 - Manual (Page 37)

2600-A2-GN20-40 March 2005 4-1
4
Configuration
Overview
The BitStorm 2600 is designed to require minimal configuration before it can be
accessed by a Network Operations Center (NOC). When the BitStorm 2600 is first
powered up it is a fully functional bridge, and all DSL ports are set to their
maximum speed.
Initial configuration is performed using the Command Line Interface (CLI). The CLI
is available from a terminal or PC connected to the CONSOLE port.
Additional configuration may be necessary, depending on the mode used to
manage the BitStorm 2600:
„ Inband
„ Out of band through Port 1
This can be performed using the CLI, SNMP, or the web interface.
For more configuration information, see the BitStorm 2600 and GranDSLAM 4200
IP DSLAM Command Line Interface Reference (for the CLI) and the online Help
(for the web interface).