beautypg.com

Installing the bitstorm 2600 into a rack, Installing the bitstorm 2600 into a rack -8 – Paradyne IP DSLAM BitStorm 2600 User Manual

Page 18

background image

1. Installation

1-8

March 2005

2600-A2-GN20-40

Installing the BitStorm 2600 Into a Rack

Two types of mounting screws are provided. Use:

„

#10-32 mounting screws for rails with threaded screw holes

„

#12-24 mounting screws and self-retaining nuts for rails with unthreaded
screw holes

Procedure

To install the BitStorm 2600 into a rack:

1. Determine where in the rack you will mount the BitStorm 2600. If your rack

does not have threaded screw holes, slip self-retaining nuts onto the rails
where the BitStorm 2600 will be fastened.

2. Place the unit so that the brackets rest against the front of the rails. Insert

screws in the bottom screw positions and hand-tighten them.

02-17070

See also other documents in the category Paradyne Hardware: