Paradyne IP DSLAM BitStorm 2600 - Manual (Page 29)

2. Cabling
2600-A2-GN20-40 March 2005 2-7
Management Port
Port 1 can be used to connect the BitStorm 2600 to a network management
system using a 10BaseT or 100BaseT LAN. A straight-through cable can be used
regardless of the destination interface, since the port automatically distinguishes
between an MDI and an MDIX.
Procedure
To use Port 1 as the out-of-band management port:
1. Connect an 8-position modular cable to Port 1.
2. If the BitStorm 2600 is in a rack, fasten the cable to a rail with a cable tie.
3. Connect the other end of the cable to your Ethernet switch or a network
interface card in a PC.
04-17521
Ethernet Switch
Port 1
PORT1-10/100BT
CONSOLE
PORT2-10/100BT
PORT3
LIN
K
A C T GigE
S TA
TU
S
AL
A R M
TES
T
ALARM
1
2
23
DSL PORTS 1-24
1000BT
24
3
4
5
6
7
8
9
10
11
12 13
14 15
16 17
18 19
20 21
22