Philips CPWBS001 - Manual (Page 8)

Installing the Wireless Base Station
Install the Wireless Base Station software from the Installation CD before
you make any hardware connections.
Installing the Wireless Base Station client software
If possible, install the client software on the computer that hosts your
Internet connection and with which you want to install and manage the
Wireless Base Station.
Warning: Do not make any hardware connections to the Wireless Base
Station until the Setup Wizard asks you to do so.
1 Place the CD included in the box in your computer's drive and
start installing the software.
> The CD should start automatically. If it does not, please double-click "My
Computer", then the drive icon and finally "Setup.exe" to start the CD.
2 Follow the on-screen instructions for setting up your Wireless
Base Station.
3 In the installation program, choose your product from the list
and click 'Next' to continue the installation procedure.
> The following elements will be installed:
• Wireless Base Station Client tool
• Manual in PDF format
• Readme document and release notes
4 This concludes the installation procedure. Please see the
following sections on connecting, configuring and using the
Wireless Base Station.
Should there appear any error messages or requests for additional
information on the screen, then please read the entire manual and the
"Troubleshooting" section. With the information given in this manual, you
should be able to solve any problems with installing and using the Wireless
Base Station cable. Please visit our web site www.philips.com if you need
further assistance.
ENGLISH 8