Philips CPWBS001 - Manual (Page 18)

If you have not previously configured TCP/IP for your computer, refer to
“Configuring Client TCP/IP”.The IP address of the connected client PC
should be 192.168.2.x (where x means 2–254).You can set the IP address
for client PCs either by automatically obtaining an IP address from the
Wireless Base Station’s DHCP service or by manual configuration.
Configuring Your Computer in Windows 98SE/Me
You may find that the instructions here do not exactly match your version
of Windows.This is because these steps and screenshots were created in
Windows 98SE. Windows 98 SE and Windows Millennium Edition are very
similar, but not identical.
ENGLISH 18