Philips CPWBS001 - Manual (Page 40)

Wireless
To configure the Wireless Base Station as a wireless access point for
wireless clients (either stationary or roaming), all you need to do is define
the radio channel, the Service Set identifier (SSID) (Default: Philips), and
encryption options.
Channel and SSID
You must specify a common radio channel and SSID (Service Set ID) to be
used by the Wireless Base Station and all of your wireless clients. Be sure
you configure all of your clients to the same values.
SSID: The Service Set ID.This should be set to the same value as other
wireless devices in your network. (Default: Philips.)
ENGLISH 40