Philips CPWBS001 - Manual (Page 12)

Basic Installation Procedure
Connecting the Wireless Base Station
1.Connect the LAN: You can connect the Wireless Base Station to your
PC, or to a hub or switch. Run Ethernet cable from one of the LAN ports
on the front of the Wireless Base Station to your computer’s network
adapter or to another network device.
You may also connect the Wireless Base Station to your PC (using a
wireless client adapter) via radio signals. Position both antennas on the back
of the Wireless Base Station into the desired positions. For more effective
coverage, position one antenna along the vertical axis and the other
antenna along the horizontal axis. (The antennas emit signals along
the toroidal plane – and thus provide more effective coverage
when positioned along different axes.)
2.Connect to the Internet: Prepare an Ethernet cable for connecting the
Wireless Base Station to a cable/DSL modem or Ethernet router. Prepare a
serial cable for connecting the Wireless Base Station to an ISDN TA or
PSTN modem.
3.Power on: Connect the power adapter to the Wireless Base Station.
ENGLISH 12