Philips CPWBS001 - Manual (Page 30)

PPTP (Point-to-Point Tunneling Protocol)
Point-to-Point Tunneling Protocol is a common connection method used for
xDSL connections in Europe. It can be used to join different physical
networks using the Internet as an intermediary.
If you have been provided with the information as shown on the screen,
enter the assigned IP address, subnet mask, default gateway IP address, user
ID and password, and PPTP Gateway.
The MTU (Maximum Transmission Unit) governs the maximum size of the
data packets. Leave this on the default value (1460) unless you have a
particular reason to change it.
Enter a Maximum Idle Time (in minutes) to define a maximum period of
time for which the Internet connection is maintained during inactivity. If the
connection is inactive for longer than the Maximum Idle Time, it will be
dropped. (Default: 0)
Enable the Auto-reconnect option to automatically re-establish the
connection as soon as you attempt to access the Internet again.
Click FINISH to complete the setup.
ENGLISH 30