Philips CPWBS001 - Manual (Page 50)

Enables Schedule-based Internet access control.
1. Click Add Schedule Rule.
2. Define the settings for the schedule rule (as shown on the following
screen).
3. Click OK and then click the APPLY button to save your settings.
Use this section to create your network schedule rules.
The times you set below are the times periods that you want the Access
Control Rule to be active. For example, if you want to block Internet access
(block WWW) from 9AM to 9PM during the week, simply configure 9:00
AM as “Start Time” and 9:00 PM as “End Time” for each weekday. During
that time period the user will be unable to access the internet.
Once the schedule rule is set up, you will need to configure or edit an
Access Control rule, and select the Schedule Rule that you want to apply to
that Access Control rule.You can set the schedule rule at the bottom of the
Access Control Configuration page in the “Scheduling Rule” drop-down
option.
ENGLISH 50