Philips CPWBS001 - Manual (Page 23)

Manual IP Configuration - for all Windows OS
You may find that the instructions here do not exactly match your version
of Windows.This is because these steps and screenshots were created in
Windows 98SE.The setup steps of manual IP configuration in Windows
98SE, Windows Me, Windows 2000, and Windows XP are very similar, but
not identical, to Windows 98SE.
1. Check Specify an IP address on the IP Address tab. Enter an IP address
based on the default network 192.168.2.x (where x is between 2 and
254), and use 255.255.255.0 for the subnet mask.
2. In the Gateway tab, add the IP address of the Wireless Base Station
(default: 192.168.2.1) in the New gateway field and click Add.
3. On the DNS Configuration tab, add the IP address for the Wireless Base
Station and click Add.This automatically relays DNS requests to the
DNS server(s) provided by your ISP. Otherwise, add specific DNS
servers into the DNS Server Search Order field and click Add.
4. After finishing TCP/IP setup, click OK, and then reboot the computer.
After that, set up other PCs on the Local Network according to the
procedures described above.
ENGLISH 23