Patton electronic 29XX - Manual (Page 95)

Dial In User Statistics window 95
Access Server Administrators’ Reference Guide 7 • Dial In
PPP Statistics
This portion of the Dial In User Statistics window (see figure 38 ) shows PPP statistics (as 32-bit variables) of
the current user selected.
Figure 38. User Statistics (PPP Statistics, LCP Statistics, IP)
Bad Address (diStatBadAddresses)
The number of packets received with an incorrect address field.
Bad Controls (diStatBadControls)
The number of packets received on this link with an incorrect control field.
Packets Too Long (diStatPacketTooLongs)
The number of received packets that have been discarded because their length exceeded the maximum receive
unit (MRU).
Note Packets that exceed the MRU but are successfully received and processed
anyway are not included in this count.
Bad Frame Check Sequences (diStatBadFCSs)
The number of packets received on this link with an incorrect control field.
LCP Statistics
This portion of the Dial In User Statistics window (see figure 38 on page 95) shows LCP statistics of the cur-
rent user selected.
Local MRU (diStatLocalMRU)
The current value of the MRU for the local PPP entity. This value is the MRU that the remote entity is using
when sending packets to the local PPP entity. This setting becomes active when the link is in the up—able to
pass packets—operational state (for more information, refer to
“Operational Status (diIpOperStatus)” on
page 98).