Patton electronic 29XX - Manual (Page 93)

Dial In User Statistics window 93
Access Server Administrators’ Reference Guide 7 • Dial In
• telnetError(62)
• rloginError(63)
• tcpConnAborted(67)—Connection to the remote service has been disconnected abruptly. For example, the
administrator of the remote machine killed the process.
• tcpConnRefused(69)—Connection to specified service on the remote machine was refused
• tcpConnReset(70)—Connection was reset
• tcpTimedOut(71)—Request to initiate connection to the remote service timed out. Connection timed out
because the remote side did not respond on the connection in a timely manner.
• l2tpCallDisconnected(80)—Client disconnected the call
• l2tpLNSConnectTimeout(81)—We accepted a tunnel and did not get a response from authenticator in
time (5 seconds)
• l2tpLACConnectTimeout(82)—We initiated the tunnel, but the other RAS didn't get back to us in time
(within 5 seconds)
• v110disabled(83)—User with V110 attempted to connect but V.110 (under Dial-in > Modify Defaults is
disabled.
The following are internal access server errors. Please contact technical support if you see these termination
reasons:
• noPoll(12)
• ipcPutMsdErr(13)
• pollErr(15)
• ioctlErr(16)
• pppPutMsgErr(17)
• dspIoctlErr(18)
• timerErr(19)
• pppOpenErr(22)
• ipLinkErr(23)
• pppLinkErr(25)
• tcpOpenErr(26)
• tcpPushErr(27)
• tcpPutMsgErr(28)
• invalidPrim(29)
• noTimers(33)
• tcpLinkErr(34)
• dspLinkErr(35)