Patton electronic 29XX - Manual (Page 79)

Manage DNIS Window 79
Access Server Administrators’ Reference Guide 7 • Dial In
DNIS Entry Window
Clicking on the ID in the Manage DNIS Window displays the DNIS Entry window (see figure 32 ) where you
can change the DNIS configuration.
Figure 32. DNIS Entry window
WAN Link (dnisPoolDesrcWan)
The WAN link the dial-in user must be connected to in order to use this DNIS configuration.
Note 0 indicates that the WAN Link is not considered when determining if the
dial-in user matches the conditions of the DNIS configuration.
Called (Calling) Number (dnisPoolDesrcDialedNumber)
The number the dial-in user must call in order to use this DNIS configuration. If more than one number is
specified, they must be separated by semi-colons (;).
Note This field has a limit of 80 characters.
DNIS profile (dnisPoolAssignedProfile)
The DNIS profile used if the dial-in user meets the conditions of this configuration. The profile indicates the
authentication method and IP address pool that the IP address will be selected from for the dial-in user that
matches the conditions of the configuration.
Note A DNIS profile of 0 indicates that no profile has been selected and the DNIS
configuration is not activated.
Status (dnisPoolStatus)
Indicates if the DNIS Configuration will be used.
• active(1)—This configuration will be compared to the inbound call and used if the dial-in user meets its
conditions.
• notUsed(2)—This configuration will not compared to the inbound call to determine if the dial-in user
matches its conditions.
• destroy(3)—Deletes the DNIS configuration