Promise Technology SuperSwap 4600 - Manual (Page 9)

Chapter 1: Introduction
3
Figure 2. SuperSwap 4600 Rear View
Specifications
• Fits most 3.5-inch and 2.5-inch form factor SATA or SAS disk drives
• Occupies three contiguous 5.25-inch component bays in PC chassis
• Standard Serial ATA interface
• Built-in Enclosure, Array Status and Drive Activity LED indicators
• Two dedicated cooling fans
• Durable metal construction
• Fully-ventilated drive carriers
• Unique handle design automatically disengages drive
• Housing Assembly dimensions (HWD): 4.96 x 5.75 x 8.07 inches (126 x 146
x 205 mm)
• Drive Carrier dimensions (HWD): 1.07 x 4.21 x 6.81 inches (27.2 x 107 x 173
mm)
• Operating temperatures: 32 ° to 110 ° F (0 ° C to 45 ° C)
• Operating himidity: 5% to 95% non-condensing
Key Features
• Supports 1.5 Gb/s and 3.0 Gb/s SATA disk drives
• Supports standard 7,200 rpm and 10,000 rpm Serial ATA drives
Power
Connector
(1of 3)
SATA
Connector
(1 of 4)
Management
Connector
Daisy-Chain
Connector
(1 of 2)
Fan (1of 2)
Sequential
Startup
Switch