Promise Technology SuperSwap 4600 User Manual
Page 13
Chapter 2: Installation
7
6.
Carefully slide the SuperSwap 4600 enclosure into the drive bays.
7.
Align the front of the housing assembly with the front of your computer.
8.
If your PC chassis has fixed mounting brackets, install and snug the eight
screws into the eight threaded mounting holes (four on each side) of the
housing assembly. Otherwise, continue with Step 9.
Note
If you are installing two SuperSwap 4600s into the same computer
chassis, install the other SuperSwap now before making any cable
connections.