Promise Technology SuperSwap 4600 - Manual (Page 14)

SuperSwap 4600 User Manual
8
9. Connect a Serial ATA cables from your FastTrak or SuperTrak Controller
card.
Promise recommends connecting the Serial ATA cables in Port number
order. For example, the top connector is Port 1 and it connects to Port 1 on
the FastTrak controller card, as shown above.
10. Connect the 3-to-3 pin SMBus cable from the Management connector on the
FastTrak or SuperTrak Controller card to the Management connector on the
back of the housing assembly.
FASTTRAK SX4300
SuperSwap
4600
Port 1
Port 2
Port 3
Port 4
Port 4 Port 3 Port 2 Port 1
Serial ATA
Cable
FastTrak SX4300
Controller Card
SMBus
Cable