Pentax Optio S12 - Manual (Page 156)

154
6
Play
bac
k
/D
el
eting
/Editi
n
g
1
Use the four-way controller (23) to select
[DPOF AUTOPRINT].
2
Press the OK button.
The DPOF AUTOPRINT screen appears.
Use the four-way controller (45) to check
the images and the print settings.
3
Confirm the number of copies, the
setting of the date, and the print
setting, and then start printing.
To set the number of copies and the date imprint, refer to “Setting the
Printing Service (DPOF)” (p.148). To print the images, refer to Steps 4
to 11 on “Printing Single Images” (pages 152 to 153).
Disconnect the camera from the printer when you have finished printing.
1
Turn the camera off.
2
Disconnect the USB cable from the camera.
3
Disconnect the USB cable from the printer.
Printing Using the DPOF Settings
Disconnecting the Camera from the Printer
If you disconnect the USB cable from the camera before you turn the
camera off, the camera returns to Playback mode.
Date Date Copies Copies 5
Total Total 10 10
100-0010 100-0010 100-0010
Date Copies
Print with DPOF setting Print with DPOF setting Print with DPOF setting
5
Total 10
OK MENU Cancel Cancel Cancel OK OK OK