Planet Technology WDAP-2000PE - Manual (Page 53)

show snmp statistics
Description: Display the current SNMP statistics.
show trap manager []
Description: Display the settings of the specified SNMP trap manager. If no trap manager is
specified, this command displays the settings of all trap managers.
(4) Diagnostics Commands
disable log
Description: Disable the log function on the specified facility.
disable syslogd
Description: Disable the remote log function.
disable trace
Description: Disable the trace function on the specified facility.
enable log []
Description: Enable the log function with the specified log level on the specified facility. If no log
level is specified, the previously configured log level is used.
enable syslogd
Description: Enable the remote log function.
enable trace []
Description: Enable the trace function with the specified log level on the specified facility. If no
log level is specified, the previously configured log level is used.
set log level
Description: Set the log level.
set syslogd
Description: Configure the IP address of the remote syslog daemon. This is used for the remote
syslog function.
show log level
Description: Display the current log level.
show log table []
Description: Display the current logged events of the specified facility. If no facility is specified,
this command displays all logged events.
show syslogd
Description: Display the current configuration of the remote log function.
(5) Security Commands
add radius server {primary | secondary}
Description: Configure the primary/secondary RADIUS server settings. This is a multi-line
command, and you have to enter the IP address and port number of the server, shared secret,
and enable/ disable.
change password
Description: Change the password for management, including HTTP and TELNET.
disable radius mac authentication
Description: Disable the use of external RADIUS servers for MAC address access control.
disable radius server {primary | secondary}
Description: Disable the use of the primary/secondary RADIUS server.
enable radius mac authentication
Description: Enable the use of external RADIUS servers for MAC address access control.
enable radius server {primary | secondary}
Description: Enable the use of the primary/secondary RADIUS server.
set radius server reattempt
Description: Configure the reattempt time for the system to contact the primary RADIUS server
after the primary RADIUS server was down.
set radius server retry
Description: Configure the number of retries after which the system may think the RADIUS
server is down.
show radius server [{primary | secondary}]
Description: Display the configuration of the specified RADIUS server. If no server is specified,
this command displays the configurations of all RADIUS servers.
51