Planet Technology WDAP-2000PE - Manual (Page 35)

• rras
• webserver (IIS)
• Radius Server (Internet Authentication Service)
• Certificate Authority
4.5.1 Windows 2000 Domain Controller Setup
1. Run dcpromo.exe from the command prompt.
2. Follow all of the default prompts, ensure that DNS is installed and enabled during
installation.
4.5.2 Services Installation
1. Select the Control Panel - Add/Remove Programs.
2. Click Add/Remove Windows Components from the left side.
3. Ensure that the following components are activated (selected):
• Certificate Services. After enabling this, you will see a warning that the com-
puter cannot be renamed and joined after installing certificate services. Select
Yes to select certificate services and continue
• World Wide Web Server. Select World Wide Web Server on the Internet In-
formation Services (IIS) component.
• From the Networking Services category, select Dynamic Host Configuration
Protocol (DHCP), and Internet Authentication Service (DNS should already be
selected and installed).
4. Click Next.
5. Select the Enterprise root CA, and click Next.
33